Try the free demonstration!
First dial in to our demo LDI-100
|
Instructions for Windows XP:
- Create a Connection by clicking Start->Control Panel
- Double click "Network Connections"
- Click "Create a new connection" to open the New Connection Wizard
- Click Next to get past the Welcome screen
- Click Next to select "Connect to the Internet"
- Select "Set up connection manually" and click Next
- Click Next to select "Connect using a dial-up modem"
- Enter "LDI Demo" as the ISP Name and click Next
- Enter "1 888 757-1222" as the phone number and click Next
- Enter your email address as the User Name
- Enter "LDIDEMO" as the User Password
- Uncheck the box to "Make this the default Internet Connection"
- Click Next and then click Finish
- You can click Dial to connect immediately, or at a later time, you can click Start->Connect To->LDI Demo
- LDI-100 will answer and connection will be made
- Open your preferred Browser
|
Now start exploring our cameras:
- Browse to 192.168.1.99/IMAGE.JPG to view a D-Link DCS-900 IP Camera
- Browse to 192.168.1.99 to see the DCS-900 home page
|
- Browse to 192.168.1.240/IMAGE.JPG to view an AirLink 101 IP Camera
- Browse to 192.168.1.240 to see the AirLink 101 home page
|
- Sorry - BL-C30A not available yet
- Browse to 192.168.1.253 to see a Panasonic BL-C30A home page
- For this camera, the User Name is "username" and the password is "password"
- For faster response, try 192.168.1.253/SnapshotJPEG?Resolution=320x240
- To pan or tilt browse to one of the below and then refresh the SnapshotJPEG
- 192.168.1.253/nphControlCamera?Direction=PanLeft
- 192.168.1.253/nphControlCamera?Direction=PanRight
- 192.168.1.253/nphControlCamera?Direction=TiltUp
- 192.168.1.253/nphControlCamera?Direction=TiltDown
|
When you're done:
- Right click on the Connection Icon in your tray and then click Disconnect
|
|
